Transactions from a Remote Workstation
Article ID#: KIN0004
Use the following
steps for configuring a remote workstation to deposit credit card transactions
- Edit the remote workstation's c:\setpb.bat
- Add the following line to the bottom of the
Note: Many systems
are installed with the "SET PBIPC=IP" line added to the setpb.bat
file. However, this line may be preceded by the "REM"
command. If so, remove the "REM" command in order to
activate the remote deposit feature.
Reboot the remote workstation.
Follow steps 1 & 2 above on
the credit card server.
Reboot the credit card server.