Support Home Sales Website Technology Contact Us
RDP Support  

RDPWin KB Booking Engine - IRM.Net RDPWin4 & PCI Compliance Search

Copy or Run a New Demo

Article ID#: KWin0191
Added: 03/22/12


Copying files from the RDP01 directory into the Demo directory must be run from a 32-bit operating system because the NEWDEMO batch file is not compatible with 64-bit operating system. If running from a 64-bit machine, a message indicating that it is not compatible will display and the process will not complete.  Everyone must exit the RDPDE - Demo System directory before beginning, otherwise new files will not be copied. 

To copy a new demo system, complete the following steps:

  1. Open a Command Prompt by clicking Start --> Programs --> Accessories --> Command Prompt, or from the Run command, type CMD.

  2. Determine the drive letter location of the RDP data. This can be viewed by clicking My Computer and noting the drive letter of the RDPNT folder.

  3. In the Command Prompt, type the drive letter (typically R: or F:), followed by the colon and hit the enter key. R: or F:

    Command Prompt

  4. Type 'CD RDP' and hit the enter key.

    Command Prompt

  5. Type 'NEWDEMO' and hit the enter key.

    Command Prompt

  6. Once the copy is complete, close the Command Prompt and login to RDP.

Support Home  RDPWin4 & PCI Compliance Enhancement Requests Open A Web Support Ticket
Training New Sales Website Old Sales Website Contact Us

 Facebook     Twitter      LinkedIn   TODF